Balboa Heater - M7 - 2.0kW (Metal Box)
Works with GL Balboa Spa Packs
A very common hot tub heater assembly for the metal GL spa packs by Balboa.
Used on: Spaform SF172, Catalina, Aegean, Hydropool, Canadian Spa, Hydrospa, Duplex Value Pack, Marquis Spa, Leisurite, Super Duplex Pack, Leisure Bay, Signature Spas, Hot Tubs Direct
Fitted with 12" M7 sensor technology to regulate spa water flow and temperature (Click HERE for Details)
Heater gaskets and split nut unions are also included making for easy installation and removal.
Solvent weld sockets for 2" pipe.
Fixed into place with 2 x metal straps
The heater comes complete with two M7 sensors, pre mounted at each end of the heater tube ready for connection to the control box. These sensors monitor each other using the onboard software to regulate the spas functions of water flow and temperature. This technology allows for a correct operating environment for the heater. The sensors automatically adapt to the flow direction and detect restrictions including dirty filters.
This Balboa heater assembly is quick to install and allows for easy servicing and troubleshooting, due to the split 2 inch buttress thread unions with O ring. The union is ready to accept glued 2 inch pipework.
Note:
Always use an appropriate spanner or long nose pliers to hold the terminal base before tightening or loosening the 10mm terminal nuts.
| Plumbing Connection | 2.0'' |
| Length (includes tails) | 495 mm |
| Mount Type | Band |
| Sensor Type(s) | M7 - Probe |
| Integrated in Spa Pack | Yes |
| Element | Incoloy |
| MPN | 58063 |
| Type | Flow Thru |
| Amps | 8.0-8.5 |
| Voltage / Hz | 230V - 50/60Hz |
| Power | 2.0 kW |
| Terminal Spacing | 33 mm |
| Element Length | 10" (255mm) |
| Element Type | Incoloy |
| Compatible Spa Pack | Balboa GS/GL Metal Box |
| Min Flow | 21gpm |
| Supply V/Hz | 230V / 50Hz |
| Amp | 8.0-8.5 A |
Important Information:
Our range of Spa Packs must be installed by a competent individual or tradesman, that is trained within the industry. Spa Packs and other computerised equipment are exempt from our returns policy if they have been opened or installed. If the spa pack is suspected as being faulty, it will need to be returned to us within the warranty period and will then be forwarded to the manufacturer for inspection. If deemed to be faulty, we will replace under warranty. If the board is not at fault or is found to have been damaged due to installation, an additional charge will be required to cover the costs of shipping and return.
*Please ensure this is the correct Spa Pack as this item is non-refundable - If you are unsure, please contact our friendly customer service team for advise & support
