Gecko Temperature Sensor
For S-Class (SSPA-1 and SSPA-2) and MSPA-MP Control Systems.
This 3-wire temperature sensor is compatible with some S-Class (SSPA-1 and SSPA-2) and MSPA-MP control systems.
Note: Gecko has changed this probe, previously with 3 wires and now with 2. Both models are fully compatible.
Replaces:
- 9920-400262
- 34-0203D
- 9920-400346
- 9920-400723
- 34-0203D
- 01560-79 (Dimension One)
4 Pin Connector, 2 wire
Can fit Gecko SSPA systems and some Hydroquip packs and the blue MSPA pack on an Arctic Spa & Some Dimension One
Dimensions
- Sensor Diameter: 9.5 mm
- Cable Length: 3 m or 10'
- Plug: 2 wires, 4 pins
Part numbers
- Gecko: 9920-400262
Important Information:
Our ranges must be installed by a competent individual or tradesman, that is trained within the industry. Spa Packs and other computerised equipment are exempt from our returns policy if they have been opened or installed. If the spa pack is suspected as being faulty, it will need to be returned to us within the warranty period and will then be forwarded to the manufacturer for inspection. If deemed to be faulty, we will replace under warranty. If the board is not at fault or is found to have been damaged due to installation, an additional charge will be required to cover the costs of shipping and return.
Please ensure this is the correct Spa Pack as this item is non-refundable - If you are unsure, please contact our friendly customer service team for advise & support
