LX JA200 Jet Pump - 2HP - 1 Speed
63mm Centre Suction x 63mm Centre Discharge
Built for continuous work
The JA Series has been one of the longest serving pumps built by LX. Designed and built to ensure it remains watertight during long periods of continuous operation.
The JA200 has a low positioned centre suction port enables the pump to self-drain once the motor is shut off.
The Motor itself is low noise and creates little vibration, so will quietly do its job allowing you, or your customers, to enjoy the hydro massage bathtub or spa.
It would most commonly be used as a circulation pump on hot tubs and swim spas. But can also be fitted to many whirlpool baths as well.
LX Whirlpool pumps are now common place on hot tubs imported from all around the world. Fitted to brands such as MAAX, Cascade, Trinity, Monalisa and AMC Winer along with many other newer spa brands appearing in the European market.
The JA200 is also ideal for use with
- Cycling water for fish ponds, including those that require salt water or actual seawater.
- Weak corrosive liquids such as weak acids (without solid granules)
- For circulating fluids for use in workshops for cooling.
A wide range of models across the range means you can often replace more expensive pump brands with these great alternatives.
Please Note:
LX pumps are no longer fitted with air switches.
Air switches or pneumatic control boxes can be fitted by a qualified electrician to these pumps.
Dimensions L x W x H | 405x186x245 |
Nozzels (Jets) | 14-16 |
HEAD - H max | 15m |
FLOW - Q max | 450 L/min |
Type / Speed | 1 Speed |
Model | JA200 |
Horsepower | 2.5 Hp |
MPN | JA200 |
Voltage / Frequency | 220-240V / 50Hz |
Amp Draw | 7.0 A |
Power - P1 | 1.50 kW |
RPM | 2900 |
Capacitor Size(s) | 25 µF |
Frame Size | 48F |
Cord / Plug Type | 3 Core AMP |
Union Connection Ref | 2.0 " (Inch) |
Part No. | JA200 |
Connection Diameter | 79mm |
Thread Type | Male - Buttress |
Impeller Part No. | B168-02 |
Impeller Diameter | 113mm |
Impeller Vane Gap | 15 |
Shaft Seal Type | Type A |
Spare Parts Available | Yes - See Spare Parts List |
Pump Specifications
Dimensions
- 405x186x245
Summary
- Power: 2HP / 1.5kW
- Nozzles: 14-16
- Max. Head: 15 m
- Max. Flow: 450 L/min
Can this pump be used instead of LP200 chinese pump
Yes the JA200 can replace a LP200.