Waterway Executive 56F Spa Pump - 2 ½HP - 1 Speed
79mm Centre Suction x 79mm Side Discharge
High Volume - Cooler Running
The Waterway range of Executive pumps are designed especially for hot tubs and spas.
Hi-performance Waterway wet ends are driven by quality E.M.G motors that by design, dissipate heat quicker and give lower running temperatures.
A commonly used pump that serves as a booster pump to deliver a high volume of water through jets in hot tubs and swim spas.
The larger 56 frame pumps use a more robust heavy duty motor and are favoured by spa manufacturers. Always check you have enough space to fit one if you intend replacing a 48 frame pump.
Waterway pumps are great alternatives to more expensive brands as well. Their wet end shape and dimensions mean they can replace most hot tub pumps out there from the likes of Aqua-flo, Century Laser, AO Smith, Vico, Sta-Rite, Emerson just to name a few. Usually little or no modifications are required.
Please Note
- The Executive pumps are supplied without a cable. We recommend re-using the cable from your old pump to ensure correct fitment to your spa pack.
- Unions Available Separately
Type / Speed | 1 Speed |
Model | Executive |
Horsepower | 2.5 Hp |
MPN | PF-25-1N22X |
Lo-Flo System | No |
Voltage / Frequency | 230V / 50Hz |
Amp Draw | 10.2 A |
Power - P1 | 2.21 kW |
RPM | 2830 |
Frame Size | 48F |
Cord / Plug Type | N/A |
Wet End HP | 5.0 Hp |
Union Connection Ref | 2.0 " (Inch) |
Configuration | Center Suction, Side Discharge |
Part No. | 310-1750 |
Connection Diameter | 79mm |
Thread Type | Male - Buttress |
Impeller Part No. | 310-4180 |
Impeller Diameter | 117mm |
Impeller Vane Gap | 15mm |
Impeller Dot Colour | N/A |
Impeller HP Rating | 5HP |
Shaft Seal Type | PS-1000 |
Spare Parts Available | Yes - See Spare Parts List |
Pump Specifications
Dimensions
- 430 x 200 x 240 (mm)
Summary
- Frame: 56
- Power: 2 ½HP
- Speed: 1
- Power (kW): 2.21
- Amp: 10.2A
- Union: 2"