Balboa HA440NG Spa Pump - 1 ½HP - 2 Speed
79mm Centre Suction x 79mm Side Discharge
The HydroAir HA440NG hot tub pumps are the ultimate benchmark in design, flexibility and performance. From small applications up to multi pump configurations to run multiple jetted systems. The HA440NG pumps supply the specific performance features you require and the long service life and powerful performance spa owners demand.
High flow rates exceeding 34 m3/h for maximum performance in your luxury applications.
All seals are carbon ceramic with Viton® elastomers for long-lasting performance, easily enduring prolonged heat and chemical exposure.
Multi-directional volute mountings provide the flexibility to accommodate any configuration; 63mm, 2 and 2.5 union options.
Choose single or 2-speed motors.
HA440NG pumps are VDE approved according to European norms EN60335-1 and EN60335-2-41.
The redesigned wet end also benefits from both sets of frame mounting lugs meaning they will fit both 48 & 56 frame motors.
- Replaces all previous versions of the single speed Magnaflow pumps.
- Supplied with unions
If you are purchasing this pump to replace an older version of the Magnaflow range, the existing unions with buttress threads will fit and seal correctly as long as the extra thick 2.0" flat gasket is used on the discharge port (QF3276). Sold separately.
Replacing a pump from an old SpaForm hot tub?
If you are replacing a Spa Form pump, then normally the part numbers will be 95-4409-SF for single speeds and 95-44092-SF for two speeds.
Dimensions L x W x H | 394x168x197mm |
HEAD - H max | 11.8 / 3.8m |
FLOW - Q max | 34 / 15m³h |
Type / Speed | 2 Speed |
Model | HA440NG |
Horsepower | 1.5 Hp |
MPN | 1023024 |
Voltage / Frequency | 230V / 50Hz, 230V / 50Hz |
Amp Draw | 5.7 / 1.5 A |
Power - P1 | 1.3 / 0.35 kW |
RPM | 2900 / 1450 |
Capacitor Size(s) | 25 / 16 µF |
Frame Size | 48F |
Cord / Plug Type | 4 Core AMP |
Union Connection Ref | 2.0 " (Inch) |
Configuration | Center Suction, Side Discharge |
Part No. | 1215021 |
Thread Type | Male - Buttress |
Shaft Seal Type | PS-201 |
Pump Specification
Dimensions
- 394 x 168 x 197 (mm)
Summary
- Frame: 48
- Discharge: Side
- Ports: 2" Suction / 2" Discharge
- Seals: Carbon ceramic with Viton® elastomers
- AMPS: 5.7A / 1.5A
- Speed: 2
- HP: 1.5 (1.3 / 0.35kW)
Just a quick email to say many thanks for your help, advice and a very speedy delivery - Sam
Thank you for your email, I’m pleased to hear the item arrived in good time and you are happy eith the service you received. If you need anything in the future, please do not hesitate to contact me directly.
Replaced an old model pump quite easily, no need to adjust any existing pipe work. Brilliant.
Thank you for your review! :)